Description

Product Introduction

E336 Water-Based Epoxy Middle Coating is a water-diluted, two-component epoxy intermediate paint designed for industrial plants, warehouses, underground parking lots, offices, and home decoration floors. Composed of water-based epoxy curing agent, liquid epoxy resin, deionized water, and additives, this product offers high compressive strength, low VOC emissions, and easy application. It is ideal for environments with high environmental requirements, providing a green and durable solution for light to medium-load floors.

Key Features

• High Compressive Strength: Suitable for light to medium-load floors.
• Eco-Friendly: Low VOC emissions and water-diluted formula make it environmentally friendly.
• Low Odor & Easy Application: Ensures a comfortable and efficient construction process.
• Versatile Use: Ideal for industrial, commercial, and residential flooring applications.

Technical Specifications

• Condition: Uniform, free from lumps or impurities.
• Bonding Strength: ≥2.5MPa.
• Drying Time (at 25℃, 50% relative humidity):
  • Surface Dry: <6 hours.
  • Full Cure: <36 hours.

Product Information

• Components:
  • Component A: Yellow transparent liquid, 18kg/barrel.
  • Component B: Colorless transparent liquid, 6kg/barrel.
• Mixing Ratio: A:B = 3:1 (by weight).
• Packaging: Printed metal drums. Recommended stacking up to three layers.
• Storage: Store at 5-35℃ in a cool, dry, and ventilated area. Keep away from fire and heat sources. Avoid direct sunlight.

Application Guidelines

• Surface Preparation:
  • Ensure the concrete floor is dry, clean, and free from dust, grease, or contaminants.
  • Use a floor grinder to remove floating dust and open capillary pores on the base surface.
• Coverage: Approximately 0.30 kg/square meter (one pass of 80-120 mesh sand or 400 mesh powder).
• Application Method: Apply by scraping using a push knife.
• Dilution: Add 20-30% water by volume and mix thoroughly.
• Pot Life: Use within 60 minutes after mixing.

Construction Conditions

• Ground Temperature: 10-35℃.
• Ambient Temperature: 10-35℃.
• Moisture Content: <8%.
• Relative Humidity: <80%.

Safety & First Aid

• Skin Contact: Wash with plenty of water and remove contaminated clothing.
• Eye Contact: Rinse with running water or saline. Seek medical attention if necessary.
• Inhalation: Move to fresh air. Keep the airway open. Seek medical attention if unwell.
• Ingestion: Rinse mouth, induce vomiting, and seek medical attention.

Precautions

• Safety Data Sheet (SDS): Request from the manufacturer for safe use.
• Ventilation: Ensure proper ventilation during application.
• Storage: Stir well before use if precipitation occurs. Avoid using as a repair material due to solvent content.