JD1010 Pintura brillante para paredes exteriores

Descripción

Presentación del producto

This product is one of JINYU paint series products based on high-quality styrene-acrylic emulsion. It has elegant, rich colors, beautiful appearance, excellent weather resistance, excellent water resistance, alkali resistance, and ultraviolet resistance. Popular and popular exterior environmentally friendly paint. Suitable for decoration and protection of exterior wall substrates such as concrete and mixed mortar.

Características del producto:

*Water-based environmentally friendly exterior wall finishing paint, excellent cost performance

*Large painting area, dense coating film and beautiful appearance

*Excellent adhesion, long-lasting wall protection, anti-powdering

*Good stain resistance and easy to clean

Ámbito de aplicación:

Widely used in decoration and protection of general building exterior walls.

Parámetros técnicos:

Implementation standard: GB/T9755-2014

Theoretical paint consumption: 3~4 square meters/kg/two coats (calculated based on dry film thickness of 30 microns)

Tiempo de secado: 1 hora para secar la superficie (a una temperatura ambiente de 23°C y una humedad relativa de 50%)

Secado durante 2 horas (a una temperatura ambiente de 23°C y una humedad relativa del 50%)

Contrast ratio: 0.87

Scrub resistance: 5000 times

Aging resistance: 250 hours

Caducidad: 12 meses a partir de la fecha de producción (sin abrir)

Use Reference:

*Substrate: should be solid, clean, dry (moisture content ≤ 10%), PH ≤ 10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.

*Old paint film: Check the aging of the old paint film, and loose parts should be completely removed

*Salting out: It is recommended to treat it with an oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry

*Construction method: either roller coating or spraying

*Dilution: No need to add water

*Utensil cleaning: Wash with clean water in time after construction is completed

*Seguridad y protección laboral: Deben tomarse medidas de seguridad durante la construcción y debe llevarse ropa de protección laboral.

*Supporting system: JD4001 alkali-resistant primer, JD4004 universal sealing primer

Packaging Specifications:

25kg iron drum packaging

Environmental Eequirements:

*Stored in a dry and ventilated warehouse at 5~35℃

*Entorno de construcción: temperatura ≥ 5℃ (temperatura base ≥ 10℃), humedad ≤ 85%, sin lluvia, nieve, niebla, potencia del viento ≤ nivel 4.

*Transportation: Handle as non-dangerous goods, prevent long-term freezing and exposure