JD3002 Revestimiento en relieve

Descripción

Introducción del producto:

This product is a three-dimensional multi-layer architectural coating made of styrene-acrylic emulsion as the base material, adding various pigments, additives, and fillers through reasonable processing.

Características del producto:

*It has a decorative effect with distinct layers and strong texture.

*High bonding strength

*Non-toxic, safe and environmentally friendly

*Good gloss and color retention

*Good water, alkali and weather resistance.

Ámbito de aplicación:

Suitable for interior and exterior wall decoration protection of various buildings.

Parámetros técnicos:

Implementation standard: GB9779-2005

Theoretical consumption: 2-3 kg/m2

Tiempo de secado: 1 hora para secar la superficie (a una temperatura ambiente de 23°C y una humedad relativa de 50%)

Hard work for 3 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Recoating time: 6 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Shelf life: 6 months from the date of production (unopened)

Utilice la referencia:

1.The base material should be flat, strong, dry, clean, and free of oil and dust. The pH value of the substrate should be less than 10, and the moisture content should be less than
10%.

2. Before construction, use JD4004 anti-alkali sealing primer or special relief sealing paint to treat the surface of the substrate.

3. When spraying relief, the air compressor pressure and nozzle size can be appropriately adjusted according to the required dot size. Apply topcoat
It must be carried out after the previous process is completely dry.

4. Stir thoroughly before construction.

*Construction method: spraying

*Limpieza de utensilios: Lávalos con agua limpia cuando no los utilices

*Seguridad y protección laboral: Deben tomarse medidas de seguridad durante la construcción y debe llevarse ropa de protección laboral.

Especificaciones de embalaje:

30Kg/barrel iron barrel packaging

Requisitos medioambientales:

*Guardado en un lugar fresco con una temperatura de 5-35℃.

*Entorno de construcción: temperatura ≥ 5℃ (temperatura base ≥ 10℃), humedad ≤ 85%, sin lluvia, nieve, niebla, potencia del viento ≤ nivel 4.

*Transporte: manipulado como mercancía no peligrosa, protegida contra la congelación y la exposición a la luz solar.