JD1012 Textura Pintura Exterior

Descripción

Introducción del producto:

This product is a thick decorative coating composed of finely ground fillers, pure acrylic adhesive and other additives.

Característica principal:

*Rich texture, long-lasting color retention and bright colors

*Rich expression and strong three-dimensional sense

*Excellent adhesion and elasticity

*Waterproof and breathable

*Excelente resistencia a la intemperie

*Water-based products, safe and environmentally friendly

Ámbito de aplicación:

It is suitable for wall decoration on various base materials such as industrial and commercial buildings, office buildings, factories, hospitals, apartment buildings, etc.

Parámetros técnicos:

Implementation standard: JG/T24–2000

Theoretical paint consumption: 2.5-3.0 kg/square meter

Drying time: 3-4 hours to surface dry (at ambient temperature of 23°C and relative humidity of 50%)

Caducidad: 6 meses a partir de la fecha de producción (sin abrir)

Utilice la referencia:

Lea las instrucciones de uso antes de la construcción

*Substrate: should be solid, clean, dry (moisture content ≤10%), PH<10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.

*Make sure all dust and foreign matter are brushed or scraped away. It is also necessary to ensure that the wall is free of salt, alkali, grease and ridges. During construction, all adjacent walls must be covered to avoid being sprayed. All cracks and peeling areas should be filled and leveled with Jinding flexible putty. Before formal application, it is recommended to use Jinding penetrating primer.

*When applying this product to old walls, make sure the wall base is solid. When applying the first coat, rinse the wall with clean water, scrub it clean, and then apply this product after it dries.

*Construction method: spraying, scraping or wiping (depending on the decorative effect)

*Dilution: Generally, there is no need to add water to dilute it. If the material is thick, you can add no more than 5% water to dilute it.

*Limpieza de utensilios: Lavar con agua limpia en el tiempo después de la construcción se ha completado

*Seguridad y protección laboral: Deben tomarse medidas de seguridad durante la construcción y debe llevarse ropa de protección laboral.

*Supporting system: JD4004 universal sealing primer

Requisitos medioambientales:

*Almacenado en un almacén seco y ventilado a 5~35℃

*Construction environment: temperature 5-40℃, humidity ≤85%, wind speed during spraying should be less than 6 meters/second, and air compressor supply pressure should be above 6 kg.

*Transporte: manipulado como mercancía no peligrosa, protegida contra la congelación y la exposición a la luz solar.