ArmorSeal PXT Clear High-Performance Polyaspartic Topcoat

Descrizione

ArmorSeal PXT Clear is a premium, two-component, aliphatic polyaspartic topcoat engineered to deliver unmatched durability and aesthetic appeal. Designed for waterproofing membrane systems, this high-solids, rapid-curing coating applies effortlessly in single or multiple coats and remains unaffected by moisture. Whether you’re protecting parking decks, pool surrounds, or decorative flake systems, ArmorSeal PXT Clear combines speed, strength, and sustainability.

Caratteristiche e vantaggi principali

✅ Rapid Cure Technology

• Tack-Free in 1 Hour, Foot Traffic Ready in 6–8 Hours
  Perfect for projects with tight deadlines. Minimize downtime without compromising performance.

✅ Eccezionale durata

• Shore D Hardness: 65 ± 2 | Tensile Strength: 3500 psi
  Resists abrasion, impact, and heavy traffic—ideal for pavimenti per garage, industrial spaces, and high-use commercial areas.

✅ UV Resistance & Weatherability

• Non-Yellowing | Gloss Retention
  Keeps surfaces looking new for years, even under direct sunlight. Perfect for pool decks e balconies.

✅ Seamless & Chemical-Resistant

• Withstands Oils, Acids, and Solvents
  Protects against common contaminants like motor oil, brake fluid, and diluted acids. Refer to the chemical resistance chart for full details.

✅ Environmentally Friendly

• Low VOC (<100 g/L)
  A safer choice for indoor and outdoor applications, meeting modern environmental standards.

Specifiche tecniche

Ideal Applications

ArmorSeal PXT Clear is the go-to polyaspartic floor coating for:

• Parking Decks & Garages
• Pool Decks & Balconies
• Decorative Flake & Quartz Systems
• Commercial & Industrial Flooring

Preparazione e applicazione della superficie

Step 1: Prepare the Surface

• Ensure concrete is fully cured (28 days minimum), clean, and structurally sound.
• Conduct moisture testing—internal humidity must be below 75% (ASTM F2170).

Step 2: Mix & Apply

1. Mix Equal Parts A & B using a Jiffy mixer and slow-speed drill.

2. Apply within 45–60 minutes of mixing to avoid pot-life issues.

3. Spread with a Squeegee, then back-roll for uniform thickness.

4. Allow 12 hours for light traffic, 40 hours for heavy/vehicular traffic.

⚠️ Un consiglio da professionista: Use spiked shoes for easy movement during application. Avoid applying thicker than 16 mils in one coat to prevent hazing.

Why Choose ArmorSeal PXT Clear?

🔬 Backed by Science, Trusted by Pros

With superior tear resistance (400 pli) and ultimate elongation (50%), this coating flexes with substrate movement, reducing crack propagation.

🌍 Real-World Tested

From polyaspartic garage floors to epoxy and polyaspartic hybrid systems, ArmorSeal PXT Clear has been proven in demanding environments.

🛡️ KAIDA PAINT Warranty

Every can is backed by KAIDA PAINT’ commitment to quality. Refer to the product data sheet for full warranty details.

Domande frequenti

❓ How does polyaspartic compare to epoxy?

Polyaspartic topcoats cure faster, offer better UV stability, and provide longer pot life than traditional epoxies.

❓ Can I apply this over an existing coating?

Yes, when applied over a compatible primed and base-coated system. For specific cases, consult a KAIDA PAINT representative.

❓ What’ the cost of polyaspartic floor coating?

While pricing varies, ArmorSeal PXT Clear offers exceptional value through its long lifespan, reduced maintenance, and minimal downtime.

Ordering Information

• Part A (Clear): GP4750CA1 | 1 Gallon (3.8L)
• Part B (Hardener): GP4750CB1 | 1 Gallon (3.8L)
• Durata di conservazione: 12 months (unopened, stored at 65–90°F)

Ready to Transform Your Space?

Whether you’re a contractor seeking a reliable polyaspartic coating near me or a DIYer exploring polyaspartic floor coating cost, ArmorSeal PXT Clear delivers professional results with ease.

📞 Contact KAIDA PAINT today for technical support or to locate a distributor.