Primário epóxi anti-estático para revestimento de pavimentos

Descrição

Introdução ao produto

Caraterísticas do produto

1. Superior Electrical Conductivity: Our primer boasts excellent static dissipation capabilities, with a typical resistance of 1×10⁴ ohms. This ensures that static charges are effectively conducted away from the surface, reducing the risk of static-related accidents.
2. Fácil aplicação: The coating is designed for seamless application, ensuring smooth roll coating without obstacles. This feature makes it an ideal choice for large-scale anti-static floor paint projects.
3. Durability and Fast Drying: With a surface dry time of only 2 hours and a hard dry time of 12 hours, our anti-static epoxy floor coating is perfect for busy industrial settings where downtime needs to be minimized.

Standards

Parâmetros técnicos

Âmbito de aplicação

1. Static Dissipation and Protection: Our anti-static floor coating primer effectively discharges static charges to prevent accidents caused by static accumulation. It also shields against electromagnetic interference and prevents dust adhesion, making it ideal for various anti-static floor coating applications.
2. Suitable for Industrial Environments: It is widely used in electronic factory workshops, pyrotechnic product factories, flour mills, and other areas where static control is crucial.

Precauções

1. Requisitos ambientais: O pavimento de betão deve ter uma resistência à compressão de ≥20MPa e uma resistência à tração de ≥1,5MPa. A superfície deve ser plana (±4mm/2m de régua), seca, limpa e isenta de óleo e outros contaminantes.
2. Condições de aplicação: The base ground temperature should be between 5-35℃, with an application environment temperature of 5-35℃. The base ground moisture content should be <8%, and the relative humidity of the application environment should be <80%.
3. Preparação da superfície: Before application, remove dust, sand, cement scum, oil, and old coatings from the base surface. Grind to create a rough surface to open the capillaries of the base surface.
4. Consumo teórico: Approximately 0.2 kg per square meter.
5. Método de utilização: Mix the main agent and curing agent at a mass ratio of 5:1. After mixing and stirring evenly, apply the coating. The mixture of A and B components should be used within 60 minutes. If the viscosity of the material increases significantly, it should not be used and should be discarded.
6. Storage Conditions: Store at a temperature of 5-35℃ in a cool, ventilated, and dry warehouse, away from sources of ignition and heat, and avoid exposure to direct sunlight.

Prazo de validade