JD1003 Cat Dinding Eksterior Warna Dinding

Deskripsi

Pengenalan Produk:

This product has excellent anti-ultraviolet aging function, excellent adhesion, dense and smooth gloss- and color-preserving film, and the coating area is a high-grade water-based environmentally friendly exterior wall paint.

Fitur Utama:

*Water-based environmentally friendly exterior wall finishing paint

*The coating film is dense and smooth, has a large painting area, and is resistant to scrubbing more than 20,000 times

*Excellent adhesion and anti-powdering, increasing the service life of exterior wall decoration

*Good stain resistance and easy to clean

Lingkup aplikasi:

It is widely used in the decoration and protection of various building exterior walls, and can also be used to cover a variety of decorative coatings to extend their service life.

Parameter Teknis:

Standar implementasi: GB/T9755-2014

Konsumsi cat secara teoretis: 3-5㎡/kg/two coats (calculated based on dry film thickness of 30 microns)

Waktu pengeringan: Surface dry for 1 hour (at an ambient temperature of 23°C and a relative humidity of 50%)

Hard work for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Contrast ratio: ≥0.90

Scrub resistance: ≥20,000 times

Aging resistance: 400 hours

Umur simpan: 12 bulan sejak tanggal produksi (belum dibuka)

Gunakan referensi:

*Substrat: harus padat, bersih, kering (kadar air ≤ 10%), PH ≤ 10; untuk substrat bubuk, gunakan alat bantu seperti spatula atau sikat kawat untuk menghilangkan lapisan bubuk dan menghilangkan bintik-bintik jamur sepenuhnya.

*Lapisan cat lama: Periksa penuaan lapisan cat lama, dan bagian yang longgar harus dihilangkan seluruhnya.

*Salting out: It is recommended to treat it with an oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse it with clean high-pressure water and dry it

*Construction method: either roller coating or spraying

*Dilution: Dilute with water, add 20% water

*Pembersihan peralatan: Cuci dengan air bersih tepat waktu setelah konstruksi selesai

*Keselamatan dan perlindungan tenaga kerja: Langkah-langkah keselamatan harus diambil selama konstruksi dan pakaian perlindungan tenaga kerja harus dikenakan.

*Supporting system: JD4001, JD4004, JD4009

Persyaratan lingkungan:

*Disimpan di gudang yang kering dan berventilasi pada suhu 5 ~ 35 ℃

*Construction environment: temperature ≥5℃ (base temperature ≥10℃), humidity ≤85%, no rain, snow, fog, wind power ≤4

*Transportasi: ditangani sebagai barang yang tidak berbahaya, terlindung dari pembekuan dan paparan sinar matahari