طلاء الأرضيات الإيبوكسي

Epoxy floor coating is a resin floor system applied on site over prepared concrete, built in three layers: a primer that seals the slab and forms the bond, a mid-coat that adds thickness and levels the surface, and a top coat that provides the wear, grip and chemical resistance.

The same system can be delivered by three carriers — solvent-based, solvent-free و water-based — and the choice is set by the substrate and by what the building can tolerate during application, not by the finish you want.

Scope: indoor concrete floors at ambient temperature. Outdoor or UV-exposed areas need a polyurethane top coat; continuous sub-zero service needs a low-temperature system.

KAIDA PAINT® المنتجات

عرض 1–16 من أصل 17 نتيجة

What Epoxy Floor Coating Systems We Supply

System family	What defines it	Typical build	Service life
Solvent-Free Epoxy Self-Leveling Floor Coating Series	No volatile carrier; placed thick and left to flow. The route for seamless, heavy-duty floors	1–5 mm (adjustable)	3–10 years
Solvent-Free Epoxy Roller/Trowel Floor Coating Series	Roller- or trowel-applied solvent-free build where self-leveling is not required	0.3–1 mm	3–5 years
Anti-Static Epoxy Floor Coating Series	A conductive path through every layer, from primer to surface, with a documented earth connection	0.5–3 mm	3–10 years
Epoxy Quartz Sand Flooring Series	Aggregate broadcast into the build coat for a hard, textured, slip-resistant surface	3–10 mm	أكثر من 10 سنوات
Epoxy Terrazzo Floor Coating Series	Decorative aggregate surface — speckled or terrazzo appearance, with grip	5–10 mm	أكثر من 15 عاماً
Anti-Slip Epoxy Floor Coating Series	Texture is the specification: the surface is designed for wet or oily areas	0.5–5 mm	3–10 years
Water-Based Epoxy Floor Coating Series	Water replaces the solvent. Low odour and low VOC, for occupied buildings	0.5–3 mm	3–10 years
Epoxy-Polyurethane Hybrid Floor Coating Series	A polyurethane surface over an epoxy base, where UV stability or flexibility is needed at the surface	0.5–3 mm	5+ years

The Parts of the System

Each part of the system is a separate product range. Follow the links for the products in each one.

برايمر الإيبوكسي للأرضية — penetrating, water-based, solvent-free and anti-static types
Epoxy mid-coat — roller-applied and self-leveling build coats
Epoxy floor top coat — gloss, colored-sand, anti-slip and anti-static finishes
Solvent-based epoxy coating — for penetrating tight, dense slabs
Solvent-free epoxy floor coating — near-100% solids, for thick builds
Water-based epoxy coating — for occupied buildings where odour is a constraint

Site and Substrate Requirements

المعلمة	Requirement	How it is verified
Substrate hardness	Concrete grade ≥ C20	Compressive strength test on the slab
Ambient temperature	5–30 °C (41–86 °F)	Tolerance varies by product
Surface roughness	Peak-to-peak wave distance below 1 mm	Surface profile assessment (see the ICRI CSP guide)
Top concrete layer thickness	[TO BE COMPLETED — minimum slab thickness]	Slab survey; affects load-bearing capacity
Substrate moisture content	≤ 8%	ASTM D4263
Ambient air humidity	30–85%	Hygrometer
التهوية	Moderate — two-part epoxy releases heat and moisture as it cures	Site assessment
Cleanliness	Dust-free, no loose cement particles	Visual inspection before priming

Where Epoxy Floor Coating Is Used

Industrial floors — the systems in this range are specified for:

مصانع التصنيع — Heavy-duty epoxy floor coatings for production lines
المستودعات ومراكز التوزيع — High-performance epoxy coatings for forklift traffic
ورش عمل السيارات — Oil-resistant epoxy floor systems
Food & Beverage Processing Facilities — epoxy flooring specified for food-contact areas
Pharmaceutical & Chemical Plants — Cleanroom epoxy flooring meeting GMP standards
Aerospace & Defense Facilities — Static-dissipative epoxy floors for sensitive equipment
Electronics & Semiconductor Factories — ESD epoxy flooring for static control
مستودعات التبريد والتخزين البارد والمستودعات المبردة — low-temperature epoxy systems — standard ambient-cure epoxy is not specified for continuous sub-zero service
Power Plants & Energy Facilities — High-temperature epoxy coatings
Mining & Heavy Machinery Areas — Ultra-wear-resistant epoxy floors

Commercial floors — where appearance and indoor air quality matter as much as load:

Retail Stores & Shopping Malls — Decorative epoxy floors with custom designs
Office Buildings & Corporate Spaces — Polished epoxy floors for modern interiors
Hospitals & Healthcare Facilities — Antimicrobial epoxy flooring
Educational Institutions — Durable epoxy floors for classrooms
Airports & Transportation Hubs — High-traffic epoxy flooring
Hotels & Hospitality Venues — Luxury epoxy flooring for lobbies

Not Sure Which Build Your Floor Needs?

Three details decide the specification: the slab (age, strength, moisture reading), the traffic (foot, pallet truck, forklift, point loads) and what the floor has to resist (chemicals, thermal shock, static, slip). Send us those three and we will tell you which system family applies, what build thickness it needs and which carrier suits the building.

FAQs About Epoxy Floor Coating

What is the best epoxy floor coating for concrete?

We offer a range of epoxy floor coatings for concrete that are specifically formulated to provide a durable, long-lasting finish that resists stains, chemicals, and moisture

Can epoxy floor coating be applied over tile or wood?

Yes, you can apply epoxy floor coating over tile or wood, but it requires surface preparation, including sanding or priming, to ensure strong adhesion

How long does epoxy floor coating last?

Service life is set by the system you specify and by the traffic the floor carries, not by epoxy as a material. Published figures across our range run from 3 years for the lightest builds to 15+ years for heavy-duty constructions, with a general-purpose industrial floor typically giving 5–8 years before recoating. Substrate preparation and moisture control decide whether the rated figure is actually reached.

How much does epoxy floor coating cost?

Coating cost is driven by the system you specify, not by floor area alone: the family, the build thickness, the substrate preparation and the site conditions all move it. Send us the floor area, the slab condition and the loads the floor will carry, and we will quote the system.

Is epoxy floor coating a DIY project?

Epoxy floor coating is installed by trained applicators. Substrate preparation, priming, mixing and placing need equipment and experience, and most failures trace back to that stage rather than to the material. We supply the systems to contractors and installers — contact us and we will discuss your project.

Epoxy Floor Thickness

Build thickness is set by the system family. Across our range the published builds run from 0.3 mm for a thin sealed coating to 10 mm for a heavy-duty construction, with a general-purpose floor typically 0.5–5 mm. Thickness is specified from the load and the service conditions, not from the floor area.

Is Epoxy Floor Acid & Alkali Resistant?

Resistance depends on the resin system and the exposure, so it is specified per chemical rather than claimed in general. Our water-based system is documented against 30% sulfuric acid, 40% sodium hydroxide, 120# gasoline and lubricating oil over 7 days without change. For concentrated acids, hot liquids or continuously wet chemical service, give us the chemical, its concentration and the temperature and we will specify the system.

Can Epoxy Floor Be Used Outdoors?

غير موصى به بشكل عام. للاستخدامات الخارجية:
Use standard epoxy primer & mid-coat
Top with weather-resistant polyurethane flooring or ceramic particle-based epoxy coatings

Is Epoxy Floor Toxic?

Uncured epoxy resin and hardener are skin and eye irritants, so mixing and application require gloves, eye protection and ventilation. Once fully cured — after the hardening period stated on the TDS — the film is inert and suitable for normal occupancy, and for food-processing areas where the specified system is rated for them. Always work from the product SDS for handling.

Can Epoxy Floor Be Applied Over Terrazzo?

Only over terrazzo that is sound, fully bonded, free of wax and polish, and abraded to give a profile the primer can grip. Wax, polish and sealers are the usual reason adhesion fails on an existing terrazzo floor. Test adhesion on a small area before committing, and confirm slab moisture is at or below 8%.