E8302 Revêtement de sol époxy autonivelant sans solvant

Description

Présentation du produit :

E8302 Solvent-Free Self-Leveling Epoxy Floor Top Coat is a high-performance, two-component, self-drying thick-coat epoxy coating. Formulated with low-viscosity liquid epoxy resin, imported additives, premium pigments, wear-resistant fillers, and curing agents, this product is designed for demanding environments. It is solvent-free, environmentally friendly, easy to apply, and available in a variety of vibrant colors, making it an ideal choice for high-traffic floors, industrial spaces, and commercial areas.

Feature Description:

• Durable et de longue durée: High compressive strength and thick coating ensure a long service life.
• Eco-Friendly & Safe: Solvent-free formula makes it environmentally friendly and safe for indoor use.
• Smooth & Seamless Finish: Self-leveling properties create a smooth, seamless, and impact-resistant surface.
• L'attrait esthétique: Bright, rich colors with a glossy finish enhance the beauty of any space.
• Application facile: Designed for hassle-free application with minimal preparation.

Spécifications techniques :

• État: Smooth consistency, free from agglomeration or mechanical impurities.
• Force d'adhérence: >2,5MPa.
• Résistance à la compression: >70MPa.
• Dureté: >2H.
• Résistance à l'usure: <0.04.
• Temps de séchage (at 25℃, 70% relative humidity):
  • Séchage en surface : <6 heures.
  • Cure complète : <48 heures.

Préparation de la surface :

Before application, ensure the base surface is clean, dry, and free from dust, grease, or old coatings. Fill cracks and holes with putty, and seal the surface with a primer. Apply an epoxy intermediate coat for optimal leveling and adhesion.

• Application Guidelines:

  • Couverture: Approximately 0.8-1kg per square meter.
  • Rapport de mélange: 4:1 (main agent to curing agent by weight). Mix thoroughly before use.
  • La vie en pot: Utiliser dans les 30 minutes suivant le mélange.
  • Méthode d'application: Apply with a trowel and use a defoaming roller for a smooth finish.
  • Dilution: Not recommended.
  • Ideal Conditions:
    • Temperature: Above 10℃.
    • Humidity: 35%-85% relative humidity.
    • Avoid construction in humid or dusty environments.

Storage & Safety

• Storage Temperature: 0-40°C.
• Durée de conservation: 12 mois.
• Précautions de sécurité:
  • Keep away from fire and explosive materials.
  • Ensure proper ventilation during application.
  • Wear protective gear and consult the product safety data sheet (MSDS) for detailed safety instructions.

Emballage :

• E8302A (Main Agent): 20kg/barrel.
• E8302B (Curing Agent): 5kg/barrel.

FAQ

• Q: Can this product be used outdoors?
  A: Yes, E8302 is suitable for both indoor and outdoor use, provided the surface is properly prepared.
• Q: Is this product safe for residential use?
  A: Absolutely! Its solvent-free formula makes it safe for homes, schools, and hospitals.
• Q: How long does the coating last?
  A: With proper application, the coating can last for years, even in high-traffic areas.