الوصف
Introduction:
The E820 Epoxy Self-Leveling Intermediate Paint is a high-quality, two-component epoxy intermediate coat designed for demanding floor coating applications. Made with low-viscosity liquid epoxy resin, imported additives, wear-resistant fillers, and curing agents, this product offers excellent performance with low VOC emissions. It is easy to apply, providing a smooth and aesthetically pleasing surface, making it ideal for epoxy intermediate floor coat applications in industrial and commercial spaces.
Product Features:
- Easy to apply: This epoxy mid coat is simple to mix and apply. After mixing the base component and curing agent in the specified ratio, it can be applied directly to the surface.
- Durable thick coating: The thick coating provides long-lasting performance and enhances the longevity of the flooring.
- High impact and compressive strength: Ideal for areas that require strong, resilient flooring, offering excellent resistance to impact and pressure.
- Smooth, seamless surface: The epoxy intermediate coat delivers a smooth and flat surface, eliminating seams and enhancing the visual appeal of the flooring.
Product Application:
The E820 Epoxy Self-Leveling Intermediate Paint is compatible with both solvent-based and solvent-free primers and topcoats. Some recommended pairings include:
- E159X Epoxy Primer (penetrating type)
- E811 Solvent-Free Epoxy Primer
- E860 Flowable Epoxy Topcoat
- E8300 Epoxy Self-Leveling Topcoat
- E8302 Solvent-Free Epoxy Self-Leveling Topcoat, etc.
This product is designed for high-performance epoxy mid coat applications in areas such as industrial floors, warehouses, workshops, and commercial spaces.
Technical Parameters:
| Serial No. | Test Item | Technical Index | Standard Value | Measured Value |
|---|---|---|---|---|
| 1 | Status | Homogeneous and lump-free after mixing | Homogeneous and lump-free | Homogeneous and lump-free |
| 2 | Applicability | No obstacles during application | Good applicability | Good applicability |
| 3 | Dry to Touch | ≤ 6 hours | 4 hours | 4 hours |
| 4 | Fully Cured | ≤ 48 hours | 28 hours | 28 hours |
Application Scope:
This epoxy intermediate floor coat is suitable for high-standard floor coatings in commercial and industrial spaces, including manufacturing floors, parking lots, and warehouses.
Application Instructions:
- Environmental Requirements: Concrete floor compressive strength ≥ 20MPa, tensile strength ≥ 1.5MPa, flatness ± 4mm/2m ruler. Ensure the substrate is dry, clean, and free from oil and contaminants. Ideal humidity for construction is 35%-80% (relative humidity).
- Construction Conditions: Substrate temperature: 5-35°C, ambient temperature: 5-35°C, substrate moisture content: <8%, relative humidity: <80%.
- Surface Treatment: Prior to application, remove dust, sand, grease, and old coatings from the surface. Fill cracks and holes with putty and seal the substrate with primer.
- Theoretical Coverage: Approximately 0.8-1.0 kg/m².
- Application Method: Mix the base component and curing agent at a 5:1 weight ratio. Apply with a notched trowel and use a foam roller to eliminate bubbles. Once mixed, the product should be used within 30 minutes. If the viscosity increases significantly, discard the mixture.
Shelf Life:
12 months from the date of manufacture.
English
Spanish
Portuguese
Arabic