{"id":438,"date":"2023-09-18T07:16:34","date_gmt":"2023-09-18T07:16:34","guid":{"rendered":"http:\/\/www.jinyupaint.com\/?post_type=product&p=438"},"modified":"2025-04-18T03:05:52","modified_gmt":"2025-04-18T03:05:52","slug":"wall-tough-elastomeric-exterior-wall-paint","status":"publish","type":"product","link":"https:\/\/www.jinyupaint.com\/id\/produk\/wall-tough-elastomeric-exterior-wall-paint","title":{"rendered":"JD1006 Cat Dinding Eksterior Elastomer Tangguh Dinding"},"content":{"rendered":"

Product Introduction:<\/h3>\n

This product is an elastic anti-crack coating for building exterior walls developed to cope with the failure of buildings to prevent cracks. It is refined from imported highly elastic self-crosslinking pure propylene glycol emulsion, nano-additives and high-quality pigments and fillers. It has elastic function, can repair cracks and self-cleaning function, has good anti-fouling properties, enhanced application power and gloss protection. Color, rich and bright colors, scrub-resistant, non-toxic and odorless.<\/p>\n

<\/h3>\n

Main Feature:<\/h3>\n

*High-end water-based environmentally friendly exterior wall finishing paint, noble and elegant, with an elasticity rate greater than 240%<\/p>\n

*Strong hiding power, dense coating, and breathable function<\/p>\n

*Excellent adhesion, long-lasting wall protection, weather resistance, and anti-powdering<\/p>\n

 <\/p>\n

Technical Parameters:<\/h3>\n

Implementation standard:<\/strong> JG\/T172-2014<\/p>\n

Theoretical paint consumption:<\/strong> about 4 square meters\/kg\/two coats when used for covering<\/p>\n

Drying time:<\/strong> 1 hour to surface dry (at an ambient temperature of 23\u00b0C and a relative humidity of 50%)<\/p>\n

Dry for 2 hours (at an ambient temperature of 23\u00b0C and a relative humidity of 50%)<\/p>\n

Recoating time:<\/strong> 24 hours (at an ambient temperature of 23\u00b0C and a relative humidity of 50%)<\/p>\n

Elasticity rate:<\/strong> >240%<\/p>\n

Contrast ratio:<\/strong> \u22650.90<\/p>\n

Aging resistance:<\/strong> 400 hours<\/p>\n

Shelf life:<\/strong> 12 months from the date of production (unopened)<\/p>\n

 <\/p>\n

Use reference:<\/h3>\n

*Substrate:<\/strong> should be solid, clean, dry (moisture content \u2264 10%), PH \u2264 10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.<\/p>\n

*Old paint film:<\/strong> Check the aging of the old paint film, and loose parts should be completely removed<\/p>\n

*Salting out:<\/strong> It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry<\/p>\n

*Construction method:<\/strong> either roller coating or spraying<\/p>\n

*Dilution:<\/strong> Dilute with water, preferably no more than 15%<\/p>\n

*Utensil cleaning:<\/strong> Wash with clean water in time after construction is completed<\/p>\n

*Safety and labor protection:<\/strong> Safety measures should be taken during construction and labor protection clothing should be worn.<\/p>\n

Supporting system:<\/strong> JD4001, JD4004, JD4009<\/p>\n

 <\/p>\n

Environmental Requirements:<\/h3>\n

*Stored in a dry and ventilated warehouse at 5~35\u2103<\/p>\n

*Construction environment: temperature \u2265 5\u2103 (base temperature \u2265 10\u2103), humidity \u2264 85%, no rain, snow, fog, wind power \u2264 level 4<\/p>\n

*Transportation: handled as non-dangerous goods, protected against freezing and exposure to sunlight
\n