KAIDA PAINT JINYU\u00ae MF floor system is a seamless, solventfree, three-component polyurethane (PU, urethane) screed floor system. Created through the 3-dimensional crosslinking of polyurethane and concrete, it yields a robust structure used widely across food, beverage, and harsh industrial environments. This\u00a0seamless, solvent-free industrial flooring system\u00a0boasts exceptional\u00a0high impact and wear resistance, alongside outstanding resilience to\u00a0chemical corrosion, heat, and humidity. It maintains a clean, hygienic, and\u00a0seamless surface, making it\u00a0ideal for food and beverage plants\u00a0and other harsh environments.<\/p>\n
JINYU\u00ae MF is the\u00a0ideal flooring for high traffic areas\u00a0and environments with moderate thermal shock. Key application scenarios include:<\/p>\n
There are seven standard colors available (approximate):<\/p>\n
yellow, bege, gules, blue, green, light gray, dark gray<\/strong><\/p>\n Des couleurs personnalis\u00e9es peuvent \u00eatre command\u00e9es sur la base de la QMOS.<\/p>\n Les donn\u00e9es suivantes sont mesur\u00e9es dans des conditions standard de laboratoire et peuvent pr\u00e9senter de l\u00e9g\u00e8res diff\u00e9rences par rapport aux donn\u00e9es r\u00e9elles sur place.<\/em><\/p>\n JINYU PAINT\u00ae MF complies with the relevant requirements of GB\/T22374 “Floor Coating Materials” standard.<\/p>\n JINYU PAINT\u00ae MF is a pre-packaged three-component system, with a single set weighing 18.38kg: Preparatory work and application in accordance with manufacturer\u2019s instructions.<\/em><\/p>\n Prepared Substrate<\/strong>\u00a0(C25 concrete, tensile strength >1.5MPa, properly grooved)<\/p>\n<\/li>\n Scratch Coat<\/strong>: JINYU PAINT MF1 Base (@ 1.8-2.0 kg\/m\u00b2) –\u00a0Trowel applied<\/strong><\/p>\n<\/li>\n Surface Coat<\/strong>: JINYU PAINT MF1 Topcoat (@ 6.0-6.5 kg\/m\u00b2) –\u00a0PU Screed Material<\/strong><\/p>\n<\/li>\n<\/ol>\n The ideal application temperature for JINYU PAINT\u00ae MF is between 15-25\u2103. It is not recommended to apply MF when the temperature is below 5\u2103, as it will seriously affect its leveling ability and result in surface defects. When the temperature is below 10\u2103, it can also significantly affect the curing speed of the product. If it is necessary to apply MF under temperature conditions exceeding 30\u2103, sufficient preparation work is required.<\/p>\n The ideal foundation condition for JINYU PAINT\u00ae MF requires a concrete base strength of over 30MPa. However, C25 concrete flooring with high-standard finishing can still meet the construction requirements.<\/p>\n Broyage :<\/strong> JINYU PAINT\u00ae MF requires grinding for base treatment with a coarser diamond blade. For very hard surfaces like wear-resistant floors, it is still recommended to use a shot blasting machine for sandblasting treatment.<\/p>\n Grooving:<\/strong> Multiple grooving needs to be cut close to the wall edge, with a depth of 6-9mm, a width of 5-8mm. The central area needs to be cut in both horizontal and vertical directions, with a spacing of about 2 meters.<\/p>\n For very hard or dense surfaces,\u00a0shot blasting\u00a0is the\u00a0recommended preparation method\u00a0to ensure optimal adhesion.<\/p>\n Before mixing, shake Part A well and then pour Part A and Part B into the bucket at the same time. Use a low-speed mixer to mix for about 5 seconds. It is recommended to use an electric mixer with adjustable speed and high torque at low speed. Then slowly pour in Part C bagged aggregate and mix at high speed for 1.5-2 minutes until completely uniform. Solvent or other diluting agents should not be added during mixing, and adding water is strictly prohibited. Mixing all the raw materials from the complete set of factory packages<\/p>\n Before scraping the primer, JINYU PAINT\u00ae MF requires pouring the material into the groove and scraping it flat. For concrete surfaces with low strength and flatness, it is recommended to apply two layers of scratch coat to achieve better sealing and flatness, which can improve the surface coating appearance.<\/p>\n Surface Layer:<\/strong> use a serrated rake or a 5mm serrated trowel for one-time spreading, with sufficient manpower to avoid joints. If the area is large, suitable isolation with decorative paper can be used in advance at the joint. Expansion Joint:<\/strong> The existing expansion joints on the concrete floor should be marked before construction, and then cut again after the coating is completed, and filled with suitable elastic polyurethane joint sealant.<\/p>\n Nettoyer les outils imm\u00e9diatement apr\u00e8s l'application \u00e0 l'aide de solvants. Absorber tout produit r\u00e9pandu avec du sable sec ou d'autres mat\u00e9riaux absorbants et essuyer avec un chiffon.<\/p>\n Tout ajout ou r\u00e9duction d\u00e9raisonnable dans l'application du mat\u00e9riau peut affecter la qualit\u00e9 de l'interface, la performance d'\u00e9tanch\u00e9it\u00e9, la performance de collage, l'\u00e9paisseur du rev\u00eatement, etc. Par cons\u00e9quent, la consommation du produit doit \u00eatre conforme \u00e0 l'utilisation recommand\u00e9e et ajust\u00e9e en fonction de la situation r\u00e9elle sur le site afin d'obtenir des performances id\u00e9ales.<\/p>\n KAIDA JINYU\u00ae MF is an advanced three-component, solvent-free polyurethane screed flooring system that forms a seamless, durable surface through three-dimensional cross-linking technology. Specifically engineered for medium to heavy industrial applications, it delivers exceptional performance in abrasion resistance, impact strength, and chemical corrosion protection while maintaining excellent resistance to thermal shock and humidity. This hygienic, easy-to-clean flooring solution is particularly suited for demanding environments such as food processing plants, pharmaceutical facilities, chemical areas, and cold storage rooms where safety, durability, and cleanliness are critical requirements. The system complies with international flooring standards and offers both functional performance and aesthetic appeal with a range of available color options.<\/p>","protected":false},"featured_media":5781,"template":"","meta":{"om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_uf_show_specific_survey":0,"_uf_disable_surveys":false},"product_brand":[],"product_cat":[109],"product_tag":[645,640,647,648,643,653,642,641,650,644,651,639,652,646,649],"class_list":["post-5780","product","type-product","status-publish","has-post-thumbnail","product_cat-polyurethane-floor-coating","product_tag-abrasion-resistant-flooring","product_tag-chemical-resistant-flooring","product_tag-cold-room-floor","product_tag-concrete-floor-protection","product_tag-food-grade-flooring","product_tag-heavy-duty-floor-coating","product_tag-heavy-duty-floor-system","product_tag-industrial-floor-coating","product_tag-industrial-flooring-system","product_tag-pharmaceutical-factory-floor","product_tag-polyurethane-screed-floor","product_tag-pu-screed-flooring","product_tag-seamless-floor-system","product_tag-solvent-free-flooring","product_tag-three-component-flooring","first","instock","shipping-taxable","product-type-simple"],"yoast_head":"\nKey Technical Data & Performance Parameters<\/strong><\/h2>\n
\n\n
\n \nObjet<\/th>\n Param\u00e8tres<\/th>\n<\/tr>\n<\/thead>\n \n Apparence<\/td>\n Apr\u00e8s agitation, le m\u00e9lange est uniforme et sans grumeaux.<\/td>\n<\/tr>\n \n R\u00e9sistance \u00e0 la traction (standard)<\/td>\n 5.5 N\/mm\u00b2<\/td>\n<\/tr>\n \n Tensile Adhesion Strength (Soak in water)<\/td>\n 4.5 N\/mm\u00b2<\/td>\n<\/tr>\n \n Shore Hardness D<\/td>\n 78.2<\/td>\n<\/tr>\n \n R\u00e9sistance \u00e0 l'impact (bille d'acier de 1000g)<\/td>\n Pas de fissures ni de d\u00e9collement<\/td>\n<\/tr>\n \n R\u00e9sistance \u00e0 l'abrasion (750g\/500r)<\/td>\n 0.018g<\/td>\n<\/tr>\n \n Compressive Resistance<\/td>\n 71 MPa<\/td>\n<\/tr>\n \n Flexural Resistance (24h)<\/td>\n 13.3 MPa<\/td>\n<\/tr>\n \n Flexural Resistance (7d)<\/td>\n 15.7 MPa<\/td>\n<\/tr>\n \n R\u00e9sistance aux acides (10% H\u2082SO\u2084, 48h)<\/td>\n Pas de bulles, pas de d\u00e9collement, pas de d\u00e9coloration.<\/td>\n<\/tr>\n \n R\u00e9sistance \u00e0 la base (30% NaOH, 48h)<\/td>\n Pas de bulles, pas de d\u00e9collement, pas de d\u00e9coloration.<\/td>\n<\/tr>\n \n R\u00e9sistance au sel (3% NaCl, 7D)<\/td>\n Pas de bulles, pas de d\u00e9collement, pas de d\u00e9coloration.<\/td>\n<\/tr>\n \n Mildew Resistance<\/td>\n 0 (no fungal growth, best grade)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n Standard<\/h2>\n
Emballage<\/h2>\n
\nComponent A: 2.68 kg\/bucket;
\nComponent B: 2.5 kg\/bucket;
\nComponent C: 13.2 kg\/package.<\/p>\nModel Specification<\/strong><\/h2>\n
\n\n
\n \nObjet<\/th>\n Description<\/th>\n<\/tr>\n<\/thead>\n \n Syst\u00e8me<\/td>\n JINYU PAINT MF<\/td>\n<\/tr>\n \n Finish<\/td>\n Matte finish<\/td>\n<\/tr>\n \n \u00c9paisseur<\/td>\n 4-6 mm<\/td>\n<\/tr>\n \n Fabricant<\/td>\n KAIDA<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n Recommended System Design for 4-6mm Thickness<\/strong><\/h2>\n
\n
Products Included in this System<\/strong><\/h2>\n
\n\n
\n \nLayer Type<\/th>\n Product Name<\/th>\n Application \/ Material Type<\/th>\n<\/tr>\n<\/thead>\n \n Couche de fond<\/td>\n Forincrete MF1<\/td>\n Trowel Apply<\/td>\n<\/tr>\n \n Couche de finition<\/td>\n Forincrete MF1<\/td>\n Forincrete MF1 PU Screed Material<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Method Statement<\/h2>\n
Optimal Application Conditions & Temperature<\/h3>\n
Concrete Substrate Preparation Guide<\/h3>\n
Mixing Instructions for 3-Component System<\/h3>\n
\nNote : Le composant C est un composant n\u00e9cessaire et doit \u00eatre ajout\u00e9 pendant l'agitation.<\/p>\nRapport de m\u00e9lange<\/h3>\n
Application<\/h3>\n
\nScratch Layer:<\/strong> Use a flat trowel or a 1mm serrated trowel to apply the coating according to the predetermined amount. During application, make sure to scrape it close to the ground and ensure the continuity of the coating to avoid any missed spots.<\/p>\n
\nDuring the construction of surface coating, avoid direct sunlight and high temperatures, as they can affect the defoaming performance of the coating material and cause many air bubbles.<\/p>\nNettoyage<\/h3>\n
Theoretical Consumption (4mm)<\/strong><\/h2>\n
\n\n
\n \nLayer<\/th>\n Application Rate<\/th>\n Application Tool<\/th>\n<\/tr>\n<\/thead>\n \n Scratch Layer<\/td>\n 1.8-2.0 kg\/m\u00b2<\/td>\n 1mm serrated trowel<\/td>\n<\/tr>\n \n Surface Layer<\/td>\n 6.0-6.5 kg\/m\u00b2<\/td>\n 5mm serrated trowel<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Application Time & Curing Time<\/strong><\/h2>\n
\n\n
\n \nParam\u00e8tres<\/th>\n Condition<\/th>\n 20\u00b0C<\/th>\n 30\u00b0C<\/th>\n<\/tr>\n<\/thead>\n \n La vie en pot<\/strong><\/td>\n <\/td>\n 25 min<\/td>\n 15 min<\/td>\n<\/tr>\n \n Minimal Interval for next coating<\/strong><\/td>\n <\/td>\n >8 hr<\/td>\n 6 hr<\/td>\n<\/tr>\n \n Temps de s\u00e9chage<\/strong><\/td>\n Surface s\u00e8che<\/strong><\/td>\n Trafic l\u00e9ger<\/strong><\/td>\n Cure compl\u00e8te<\/strong><\/td>\n<\/tr>\n \n +20\u00b0C\/2mm<\/td>\n ~14-16h<\/td>\n ~24-36h<\/td>\n ~7d<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"